Sale

Cork-filled PLA based filament EasyCork 2.85mm Light 50 gram 3D Printer Filament



EasyCork is a lightweight cork-filled PLA-based filament which is gravimetrically filled with approximately 30% cork fibres. The gravimetric filling with relatively lightweight cork fibres means that EasyCork has extremely high volumetric cork filling properties, allowing you to 3D print beautiful objects with great cork-like aesthetics and cork-like properties such as...

Regular price $20.00 $25.00
Regular price $20.00

V177-285ECORK-LI-0050

3 In Stock Out of stock 3



Notify Me


EasyCork is a lightweight cork-filled PLA-based filament which is gravimetrically filled with approximately 30% cork fibres. The gravimetric filling with relatively lightweight cork fibres means that EasyCork has extremely high volumetric cork filling properties, allowing you to 3D print beautiful objects with great cork-like aesthetics and cork-like properties such as being lightweight and impact resistant.
EasyCork is a very easy to print material as it is based on our EasyFil PLA compound and the 30% gravimetrical filling with cork fibres make the filament absolutely warp-free.

Unique features

  • High cork filling
  • Real cork feel, look and smell
  • Very easy to print
  • Warp-free printing
  • Great thermal stability and filament flowing behaviour
  • Perfect first- and inter-layer adhesion
  • Can be printed at high printing speeds
  • Lightweight and impact resistant

General printing guidelines

Nozzle size: ≥ 0.15mm Layer height: ≥ 0.20mm Flow rate: ± 100%
Print temp: ± 210 - 260° C Print speed: High Retraction: Yes ± 5mm
Heat bed: ± 0 - 60° C Fan speed: 50-100% Experience level: Beginner

Above displayed settings are meant as guidance to find your optimal print settings. These ranges in settings should work for most printers, but please do feel free to experiment outside these ranges if you think it is suitable for your printer. There are a lot of different type of printers, hot-ends and printer offsets that it is extremely difficult to give an overall one-size-fits-all setting.

 Filament length

ρ: 1.027 g/cc 50 gr coil 0.5 Kg spool
Ø 1.75mm ± 20.2m ± 202m
Ø 2.85mm ± 7.6m ± 76m

 Nozzle cleaning

When printing with filled/composite filaments it is recommended to clean your nozzle immediately after printing by feeding 15-20cm PLA filament through your nozzle. This will make sure that any potential fillers are flown out of your nozzle. It is even better to use glow in the dark PLA as the extremely hard phosphorous particles are much more likely to scrape out residual waste from your nozzle.

 Product export information

HS Code: Description Country of origin
39169090 Monofilament Netherlands

 Compliance

This filament is compliant to below listed directives and regulations.

  • RoHS directive 2011/65/EC
  • REACH directive 1907/2006/EC

This declaration of conformity to directives and regulations is prepared according to our present standard of knowledge and may be amended if new cognitions are available and applies only for the above described products.

V177-285ECORK-LI-0050

 

SHIPPING

Our Couriers Include:

Australia Post: Offering Parcel Post and Express Post, with tracking numbers provided via email for easy parcel tracking.
Aramex: Provides an email confirmation and tracking number, with ATL (Authority to Leave) and signature-required services.
Allied Express: Contacts customers before delivery for verification and leaves instructions for missed deliveries.
Border Express: Requires a non-PO box address and leaves instructions for re-delivery for missed packages.
CouriersPlease: Offers several delivery options including ATL, collection point delivery, and rescheduling.
Direct Freight Express: Sends consignment note and instructions for re-delivery if needed.
Hunter Couriers: Email tracking number provided, with re-delivery options for missed packages.
Sendle: Confirmation and tracking number emailed, with parcels left at designated collection points if missed.
StarTrack: Real-time tracking with electronic proof of delivery in major cities, managed by Australia Post.
TNT Australia: Non-PO Box address required, with orders possibly left without signature unless otherwise requested.
Toll: Instructions provided for collection or re-delivery of missed packages.
Dispatch & Delivery:

Dispatch times range from 1-2 working days post-payment, without guaranteed delivery on specific dates or times. We maintain open communication for any delivery updates or unforeseen delays.
Undeliverable Postcodes:

We strive for Australia-wide shipping, yet some remote areas may incur additional shipping costs or may not be serviceable. Orders to undeliverable postcodes may be adjusted or cancelled accordingly.
Shipping to New Zealand:

Selected items can be shipped to New Zealand, with orders over NZ$1000 subject to Duty tax, processed by the courier.
Liability for Missing or Damaged Packages:

Suppliers are responsible for any missing or damaged packages, in line with our Service Level Agreement.
Incorrect Postage Address:

Orders cannot be altered once placed, but can be cancelled and reordered with the correct address through The TradeHub.
The TradeHub is dedicated to providing a seamless shopping experience, ensuring your goods are delivered efficiently and securely.

WARRANTY & RETURN POLICY

Cork-filled PLA based filament EasyCork 2.85mm Light 50 gram 3D Printer Filament
Cork-filled PLA based filament EasyCork 2.85mm Light 50 gram 3D Printer Filament
Regular price $20.00 $25.00
Regular price $20.00